Plastic and Semi-Plastic Paints
Plastic paints are among the emulsion paints that are water-based and produced based on copolymer resin. These paints are usually matte, and depending on the type and amount of copolymer used in them, they have relative resistance to water wash and usually due to their low and short-term resistance to moisture, are generally used for interior surfaces of buildings and mostly for spaces that are away from humidity, primarily used to beautify plaster, cement, and concrete surfaces
Arya Pars All-Plastic Paint
This paint is part of the water-based emulsion paint category and is based on vinyl acetate copolymer resin, made from the best raw materials suitable for Iran’s climatic conditions. High coverage and washability are prominent features of this product. This paint can be applied using a roller, brush, or spray gun.
To use a roller or brush, add 50% water to the paint, and for a spray gun, add 70% water. Before use, clean the intended surface from any grease, contamination, and dust. Then saturate the surface with a suitable primer, mix the paint uniformly according to the mentioned ratios, and apply it evenly to the surface.
After each painting session, it takes between 7 to 10 hours for the surface to dry at a temperature of 25 degrees Celsius. For spray painting, the paint should be uniformly mixed before and after dilution. Also, strain the diluted paint through a suitable strainer before application. It is essential to ensure that the surface to be painted is completely dry.
This paint is produced in white color and is available in quart, gallon, and 2.5-gallon packaging.
Arya Pars Semi-Plastic Paint 110
This paint is made from the best available raw materials in the market. Special features of this product include high coverage, suitable brushability, and absence of brush marks and streaks. Additionally, this paint is applicable on all plaster, cement, and concrete surfaces for interior building facades and can be applied using a brush, roller, or spray gun.
For use with a roller or brush, add 50% water to the paint, and for use with a spray gun, add 70% water to the paint and thoroughly mix it until homogeneous.
In the spray gun application method, after dilution and before application, the paint must pass through an appropriate strainer. Then, clean the desired surface from any dust, grease, and contamination, saturate it with an appropriate primer, and apply the paint.
After each painting session, allow approximately ten hours of drying time at a temperature of 20 to 25 degrees Celsius.
This paint is produced in white color, and is available in quart, gallon, and 2.5-gallon packaging.
Arya Pars Semi-Plastic Paint 120
This paint is made from the best raw materials available in the market. Special features of this product include high coverage, suitable brushability, and absence of brush marks and streaks. Also, this paint is applicable on all plaster, cement and concrete surfaces for interior building facades and can be applied using a brush, roller, or spray gun.
For use with a roller or brush, add 50% water to the paint, and for use with a spray gun, add 70% water to the paint and thoroughly mix it until homogeneous.
In the spray gun application method, after diluting and before applying, the paint must be passed through a suitable strainer, then clean the desired surface from any dust, grease or contamination, saturate it with an appropriate primer and apply the paint.
After each painting session, allow approximately ten hours of drying time at a temperature of 20 to 25 degrees Celsius.
This paint is produced in white color, and is available in gallon and 2.5-gallon packaging.
Arya Pars Semi-Plastic Paint 130
This paint is made from the best available raw materials in the market. Special features of this product include its high coverage and suitable brushability. Moreover, this paint is applicable to all plaster, cement, and concrete surfaces in the interior of buildings and can be applied using a brush, roller, or spray gun.
To use with a brush or roller, add 50% water to the paint, and for use with a spray gun, add 70% water and mix thoroughly.
In the spray gun application method, after diluting and before applying, the paint must pass through an appropriate strainer. Then, clean the desired surface from any dust, grease, or contamination, saturate it with a suitable primer, and apply the paint.
After each painting session, allow approximately ten hours for drying at a temperature of 20 to 25 degrees Celsius.
This paint is produced in white color, and is available in gallon, 2.5-gallon, and 5-gallon packaging.
Arya Pars Sepidar 2000 Semi-Plastic Paint
This paint is made from the best raw materials available in the market. The special features of this product include high coverage, suitable brushability, and absence of brush marks and streaks. Additionally, this paint is applicable on all plaster, cement, and concrete surfaces in interior building facades and can be applied using a brush, roller, or spray gun.
For use with a roller or brush, add water to the paint in a 50% ratio, and for use with a spray gun, add water in a 70% ratio and mix thoroughly.
When using a spray gun, after dilution and before application, the paint must be passed through an appropriate strainer. Then, clean the desired surface from any dust, grease, or contamination, saturate it with a suitable primer, and apply the paint.
After each painting session, at a temperature of 20 to 25 degrees Celsius, approximately ten hours of drying time must be considered.
This paint is available in white color and is packaged in gallon and 2.5-gallon containers.
Arya Pars Sepidar 2002 Semi-Plastic Paint
This paint is made from the best available raw materials in the market. The special features of this product include high coverage and suitable brushability. Moreover, this paint is applicable to all plaster, cement, and concrete surfaces in the interior of buildings, and can be applied using a brush, roller, or spray gun.
To use with a brush or roller, add water to the paint at a ratio of 50%, and for use with a spray gun, add water at a ratio of 70%, and mix thoroughly.
In the spray gun application method, after diluting and before application, the paint should be passed through a suitable strainer. Then, clean the surface from any dust, grease, or contamination, saturate it with a suitable primer, and apply the paint.
After each painting session, approximately ten hours of drying time should be considered at a temperature of 20 to 25 degrees Celsius.
This paint is produced in white color, and is available in gallon and 2.5-gallon containers.
Arya Pars Sepidar 1000 Semi-Plastic Paint
This paint is made from the best available raw materials in the market. Its special features include high coverage, suitable brushability, and absence of brush marks and streaks. Additionally, this paint is applicable on all plaster, cement, and concrete surfaces in the interior of buildings and can be applied using brushes, rollers, and spray guns.
For use with a roller or brush, add water to the paint in a 50% ratio, and for use with a spray gun, add water in a 70% ratio and mix thoroughly.
In the spray gun application method, after dilution and before application, the paint must pass through a suitable strainer. Then, clean the desired surface from any dust, grease, or contamination, saturate it with suitable primer, and apply the paint.
After each painting session, allow approximately ten hours for drying at a temperature of 20 to 25 degrees Celsius.
This paint is produced in white color, and is available in gallon and 2.5-gallon packaging.
Plastic and Semi-Plastic Paints
Plastic and Semi-Plastic Paints
Plastic and Semi-Plastic Paints
