{"id":17506,"date":"2020-07-30T23:43:27","date_gmt":"2020-07-30T20:13:27","guid":{"rendered":"https:\/\/aryasath.com\/?page_id=17506"},"modified":"2025-04-15T10:00:44","modified_gmt":"2025-04-15T06:30:44","slug":"vinyl-coatings","status":"publish","type":"page","link":"https:\/\/aryasath.com\/en\/vinyl-coatings\/","title":{"rendered":"Vinyl Coatings"},"content":{"rendered":"

The category of vinyl coatings includes the following types:<\/p>\n

Wash Primer Undercoat<\/strong><\/h2>\n

This two-component primer coating is based on polyvinyl butyral resin and acid hardener. This product is used to increase adhesion on non-ferrous metal surfaces such as aluminum, copper and galvanized surfaces.<\/p>\n

This coating is applied in low thicknesses and its use alone is not recommended to protect metal surfaces, but it is simply used as an intermediate agent to increase adhesion, and after that, the implementation system of the next layers is done completely.<\/p>\n

Surface Preparation for Applying Wash Primer Undercoat<\/strong><\/h3>\n

The desired surface should be free of any contamination (such as oil, grease, dust, salts, etc.) which can be achieved by methods such as applying air pressure or washing with detergents and thinners. To enhance the adhesion of the light spray paints, it is<\/p>\n

recommended to create suitable roughness using sandpaper.<\/p>\n

Vinyl Coatings<\/p>\n

Painting Environment Conditions<\/strong><\/h4>\n

The best temperature of the environment and work surface during painting is between 10-45 degrees Celsius. In order to achieve a suitable quality, it is recommended to paint as much as possible in enclosed environments. The ambient temperature during painting should be at least 3 degrees Celsius higher than the dew point of the environment to prevent the formation of water droplets on the surface.<\/p>\n

Coating Application Method<\/strong><\/h5>\n

First, thoroughly mix Part A, then mix Parts A and B together in the specified weight ratio and by adding the appropriate amount of T-420 thinner, bring it to the spray viscosity. Mix the paint in the container repeatedly and spray it by maintaining the right distance between the nozzle and the surface, taking into account the movement and speed of the air during application. It is necessary to observe the appropriate time interval between the execution of coatings, and avoid using the paint mixture after this time has elapsed.<\/p>\n

Painting Equipment<\/strong><\/p>\n